Birmingham Roof Pros provides professional commercial roofing in Birmingham, AL for residential and commercial properties across Jefferson County and the Birmingham district. Downtown Birmingham has an unusual concentration of early steel-framed masonry commercial buildings, because this city could make the steel and had the money to build tall early. The result on a low-slope roof is the same argument as on a bungalow, at four stories and with more water above it.
Those roofs die at the wall, not in the field. A base flashing that stops short of eight inches above the membrane, a through-wall counterflashing that was never installed, a coping with open joints and no continuous cleat, and a hundred-year-old parapet whose interior face has been wet for decades. We start every commercial survey at the perimeter and the penetrations, then look at the field.
Our specification work names things. Sixty and eighty mil TPO, EPDM and two-ply SBS-modified bitumen. Polyiso to the required R-value with a tapered package where drainage is the actual problem. Mechanically attached or fully adhered chosen against the real deck, which we confirm with a core cut rather than assume from the drawings. Tightened fastening at corners and perimeters for uplift. Recovers get an evidence test before we will quote one.
Core cuts at a sensible grid, a moisture reading at each, and a layer count. Wet insulation left under a new membrane is a slow, expensive failure, and a great many recover proposals in this market are written from a walk-round. Where the readings say tear off, we say tear off, even though it is the harder sale. Older industrial buildings around Ensley, Fairfield and the Bessemer corridor bring their own habits.
Slag-surfaced built-up roofs, riveted steel decks, monitor roofs, and stacks and flues from processes that ended decades ago. Abandoned penetrations get cut back and properly closed, not membrane-wrapped in place, because every one left in situ is a future call-out. Uplift pressures are calculated for the building's actual height and exposure rather than copied from the last job on the block.
We work in phases with a nightly dry-in so tenants stay open, we coordinate with the property manager and the fire marshal on hot work, and we prefer a twice-yearly maintenance agreement with a photographed condition log to an emergency relationship. Buildings that get looked at in March and October rarely need us in January. Roof access, fall protection anchors and equipment curbs get surveyed at the same time, because those are what maintenance actually needs.
Our licensed and insured team brings the right materials and equipment to every job — two-piece counterflashing cut into a raked bed joint, a poured chimney crown with an overhang and a drip kerf, a framed cricket above stacks wider than thirty inches, self-adhered flashing membrane turned up the brick face, sheet-metal thimble covers sealed at abandoned flue openings, corbelled brick stacks standing proud of the ridge — and backs the work with a written workmanship warranty. We serve Birmingham and nearby communities including Hoover, Vestavia Hills, Alabaster, Homewood.
What We Handle
Everything our commercial roofing in Birmingham covers
One crew, one point of contact, and the full range of commercial roofing work in Birmingham, AL. If it is on this list we do it in house rather than handing it to a subcontractor:
- commercial roofing birmingham al
- commercial roofing contractor
- tpo roof installation jefferson county
- flat roof commercial birmingham
- industrial roofing alabama
- warehouse roof repair birmingham al
- commercial roof replacement birmingham
- parapet flashing commercial
- roof maintenance program birmingham
- church roof repair alabama
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Birmingham services.
Materials, equipment and how we do commercial roofing
The difference between commercial roofing that lasts and commercial roofing that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with two-piece counterflashing cut into a raked bed joint, a poured chimney crown with an overhang and a drip kerf, a framed cricket above stacks wider than thirty inches, self-adhered flashing membrane turned up the brick face, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Birmingham job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of roofing work in Jefferson County and the Birmingham district means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do commercial roofing outside Birmingham
Birmingham Roof Pros covers Birmingham and the surrounding communities of Jefferson County and the Birmingham district. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Commercial Roofing in Hoover, AL — Jefferson and Shelby counties, population 92,606
- Commercial Roofing in Vestavia Hills, AL — Jefferson County, population 39,102
- Commercial Roofing in Alabaster, AL — Shelby County, population 33,284
- Commercial Roofing in Homewood, AL — Jefferson County, population 26,414
- Commercial Roofing in Trussville, AL — Jefferson and St. Clair counties, population 26,123
- Commercial Roofing in Bessemer, AL — Jefferson County, population 26,019
Start on the Birmingham Roof Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Birmingham Chooses Birmingham Roof Pros
- ✓We settle the chimney before we price the covering, because on a pre-war Birmingham house that is the item that moves the number
- ✓Every dead flue gets three priced options — rebuild and recrown, cap and keep, or remove below the deck — and we say which we would choose
- ✓Nothing comes down until the fuel question is answered in writing, and a live appliance is re-vented by a licensed mechanical contractor first
- ✓Flashing is two pieces of fabricated metal cut into a raked bed joint, never one piece bedded in sealant
The standards behind commercial roofing
Quality here is not a matter of opinion — it is written down. The commercial roofing work we do in Birmingham follows published industry standards: NRCA publishes the Roofing Manual, the industry's reference for details and slope minimums, and Asphalt Roofing Manufacturers Association sets the shingle application and ventilation guidance the warranties reference. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every commercial roofing project in Birmingham gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free commercial roofing free estimate in Birmingham, or request a quote and we'll get right back to you.